Displays a table of available SAS, SATA, and IR volumes in the
    SAS Controller.

    Each column in the table is displayed as follows:

    Volume      Description

    ID          SAS ID for SAS/SATA device.
                RAID volume ID for RAID volume set.
    Enc         Enclosure number:

                o  Direct attached is displayed as "DA."

                o  Non-direct attached shows the enclosure handle
                   number.

    PHY         SAS PHY number of the physical disk.
    Slt         Physical slot or element index in the enclosure where
                the target device is physically located.
    Device      OpenVMS device name.
    Type        Device type.
    Size        Disk size in MB.
    SAS         SAS address (World Wide Identifier) of the device.
    Address
    Product     Product model of the disk.
    Name

    Format

      SHOW DISK  [sas_id]

1  –  Parameters

 sas_id

    The SAS ID is the ID shown when you enter the SAS command SHOW
    DISK.

    If you do not enter a SAS ID, the SAS utility displays all
    available physical SAS disks.

2  –  Qualifiers

2.1    /FULL

    Displays additional information about disks.