Library /sys$common/syshlp/NET$MGMT_HELP.HLB  —  routing  circuit  status
     DATA LINK PORT
         Support: All

         Name of the data link port used for this circuit.  Not supported on
         DA circuits.

     DATA LINK SDU SIZE
         Support: All

         Maximum size, in octets, of a Data Link SDU for this circuit. This
         includes the Network layer header, but excludes the Data Link layer
         header. The value of this status is the lesser of the value of the
         characteristic manual data link sdu size and any limit  imposed by
         the Data Link layer.

     LAN L1 ID
         Support: L1,L2

         LAN ID allocated by the LAN level 1 designated router. This attribute
         is supported only if the circuit's characteristic  type is csma-cd.

     LAN L2 ID
         Support: L2

         LAN ID allocated by the LAN level 2 designated router. This attribute
         is supported only if the circuit's characteristic  type is CSMA-CD.

     L1 DESIGNATED ROUTER
         Support: L1,L2

         ID of the DECnet-Plus level 1 designated router on this circuit. This
         attribute is supported only if the circuit's characteristic  type is
         CSMA-CD. If this node does not  participate in the router election
         process, the value returned is  00-00-00-00-00-00.

     L2 DESIGNATED ROUTER
         Support: L2

         ID of the DECnet-Plus level 2 designated router on this circuit. This
         attribute is supported only if the circuit's characteristic  type is
         CSMA-CD. If this node does not  participate in the router election
         process, the value returned is  00-00-00-00-00-00.

     PHASEIV DESIGNATED ROUTER
         Support: L1,L2

         ID of the Phase IV designated router on this circuit. This attribute
         is supported only if the circuit's characteristic  type is CSMA-CD.
         If this node does not  participate in the router election process, the
         value returned is  00-00-00-00-00-00.

     POINT-TO-POINT ID
         Support: L1,L2

         ID allocated to the circuit during its initialization. This attribute
         is supported only if the circuit's characteristic  type is HDLC,
         DDCMP, or X25 static.

     STATE

         State of the routing circuit entity.

         OFF - The circuit is disabled.

         ON  - The circuit is enabled.
Close Help