Library /sys$common/syshlp/NET$MGMT_HELP.HLB  —  llc2  sap_lnk, character
    ACKNOWLEDGE TIMER
       Default:   1000                            Value:   1--60000

       Time, in milliseconds, that the link waits for an acknowledgment before
       initiating recovery action. The granularity of this timer is 10
       milliseconds. Values that are not multiples of 10 are rounded up.

    BUSY TIMER
       Default:   10000                           Value:   1--60000

       Time, in milliseconds, that the link waits for indication of the
       clearance of a busy condition at the remote station. The granularity of
       this timer is 10 milliseconds. Values that are not multiples of 10 are
       rounded up.

    HOLDBACK TIMER
       Default:   500                              Value:   0--60000

       Delay, in milliseconds, before an acknowledgment must be sent. The
       granularity of this timer is 10 milliseconds. Values that are not
       multiples of 10 are rounded up.

    LOCAL RECEIVE WINDOW SIZE
       Default:   127                               Value:   1--127

       Window size used by the link for receiving frames.

    MAXIMUM DATA SIZE
       Default:   1028                              Value:   1--65531

       Largest frame size, in octets, that the link can use to send or receive
       data. This value does not include the size of the frame header.

    POLL TIMER
       Default:   1000                              Value:   1--60000

       Time, in milliseconds, that the link waits for a response with the F-bit
       set. The granularity of this timer is 10 milliseconds. Values that are
       not multiples of 10 are rounded up.

    REJECT TIMER
       Default:   3000                              Value:   1--60000

       Time, in milliseconds, that the link waits for a reply to a REJ ( reject
       frame. The granularity of this timer is 10 milliseconds. Values that are
       not multiples of 10 are rounded up.

    REMOTE LSAP ADDRESS
       Default:   7E                                 Value: hex-number

       Address of the destination LSAP (local service access point  to be used
       by the link. The lowest significant bit must be clear; that is, the
       address must be an individual address.

    REMOTE MAC ADDRESS
       Default:   00-00-00-00-00-00                  Value: lan-address

       Destination MAC address to be used by the link. The lowest significant
       bit of the first octet must be clear; that is, the address must be an
       individual address.

    RETRY MAXIMUM
       Default:   10                                 Value:   1--255
       Maximum number of times that the link retransmits a frame before
       assuming a fatal error and taking more drastic recovery action.
Close Help