A routing egp group entity defines a set of systems in the same autonomous
   system with which this system may exchange EGP messages. This entity is
   supported only on level 2 routers that support dual routing and, in
   particular, the EGP routing protocol.

1  –  character

     AUTONOMOUS SYSTEM NUMBER
         Support: L2,IP
         Default: 0                              Value: 0-65535

         The autonomous system number common to members of this group. You can
         modify this characteristic only when the entity is disabled. This
         attribute is supported only if the node is a level 2 router, and if the
         system supports dual routing both DECnet and IP routing.

     EXTERNAL ROUTES
         Support: L2,IP
         Default: Receive                        Value: Set of send,recieve

         If the set includes receive, external gateway routes are accepted from
         neighbors in the group; if the set does not include receive, external
         gateway routes are discarded. If the set includes send, external
         gateway routes will be sent to neighbors in this group; if the set does
         not include send, external gateway routes are not sent. You can modify
         this characteristic only when the entity is disabled.

     MAXIMUM ACTIVE NEIGHBORS
         Support: L2,IP
         Default: 1                              Value: 0-255

         The maximum number of neighbor systems in the group that this system
         will attempt to acquire and maintain in the Up state at any given time.
         You can modify this characteristic only when the entity is disabled.

     RECEIVE METRIC CLASS
         Support: L2,IP
         Default: External                       Value: Internal or External

         The class to be associated with routes received from EGP neighbors in
         this group unless overridden by a routing receive route entity. You
         can modify this characteristic only when the entity is disabled.

     SEND LOCAL METRIC
         Support: L2,IP
         Default: 1                              Value: 0-255

         The metric value to be used when announcing routes derived from local
         information unless overridden by a routing send route entity. You
         can modify this characteristic only when the entity is disabled.

     SEND METRIC CLASSES
         Support: L2,IP
         Default: Internal                    Value: Set of external, internal

         Routes received through routing protocols other than EGP with metric
         classes in this set are candidates for announcement in EGP messages
         sent to neighbors in this group, subject to route propagation policy.
         Routes with metric classes not specified in this set will not be
         announced.  You can modify this characteristic only when the entity is
         disabled.

     SEND REPLACEMENT METRIC
         Support: L2,IP
         Default: 1                              Value: 0-255

         Specifies the metric value to be used when announcing routes derived
         from non-EGP routing protocols unless overridden by a routing send
         route entity.  You can modify this characteristic only when the
         entity is disabled.

2  –  status

     STATE

         State of the routing egp group entity.

         OFF - The entity is disabled.
         ON  - The entity is enabled.