Each LLC2 Port entity has an LLC2 SAP (service access point  entity
   associated with it. An LLC2 Sap entity allows links to be multiplexed over
   its associated port.

1  –  character

    LAN STATION
       Default: No entity name                    Value: Local-entity-name

       Name of the LAN station entity used by the SAP. You must specify a value
       for this attribute before you enable the SAP.

    LOCAL LSAP ADDRESS
       Default:   7E                              Value:   Hex-number

       Address of the local link service access point (LSAP) to be used. The
       lowest significant bit of this value must be clear; that is, the address
       must be an individual address.

2  –  counter

    TIMES SAP STATE CHANGED

        Number of times the status attribute state has changed from on to off,
        or from off to on.

3  –  status

    LAN PORT

        Name of the LAN port that is opened and enabled when this SAP is
        successfully enabled. If the SAP is not enabled, this status has a null
        value.

    MAXIMUM PDU SIZE

        Largest frame size, in octets, that can be used to send or receive data
        on this SAP.

    STATE

        State of the llc2 sap entity.

        OFF  - The SAP is disabled.

        ON   - The SAP is enabled.