The CLEAR EXECUTOR command resets to the default the value (if any)
 or removes selected local node parameters from the volatile database
 on the local node.  The PURGE EXECUTOR command removes selected local
 node parameters from the permanent database on the local node.

 You can not clear the BUFFER SIZE or STATE parameters from the volatile
 database.

 CLEAR   EXECUTOR        (parameters...)

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

1  –  ALIAS

 Indicates that the parameter is among the set used for alias control.

1.1  –  INCOMING

 Removes from the volatile database the ALIAS INCOMING parameter for the
 local node.

1.2  –  MAXIMUM LINKS

 Removes from the volatile database the ALIAS MAXIMUM LINKS parameter for
 the local node.

1.3  –  NODE

 Removes from the volatile database the ALIAS NODE parameter for the
 local node.

2  –  ALL

 Applies only to purging the executor.  Removes from the permanent
 database all executor parameters.

3  –  AREA

 Indicates that the parameter is used to control area routing.  The
 possible parameters are AREA MAXIMUM COST and AREA MAXIMUM HOPS.

3.1  –  MAXIMUM

3.1.1  –  COST

 Resets to its default value the AREA MAXIMUM COST value for the local
 node in the volatile database.

3.1.2  –  HOPS

 Resets to its default value the AREA MAXIMUM HOPS value for the local
 node in the volatile database.

4  –  BROADCAST ROUTING TIMER

 Resets to its default value the BROADCAST ROUTING TIMER value in the
 volatile database.

5  –  BUFFER SIZE

 Applies only to purging the executor.  Removes from the permanent
 database the BUFFER SIZE parameter.

6  –  COUNTER TIMER

 Removes the volatile database the logging timer to prevents any further
 circuit counter logging for the local node.

7  –  DELAY

7.1  –  FACTOR

 Resets to its default value the DELAY FACTOR value for the local node
 in the volatile database.

7.2  –  WEIGHT

 Resets to its default value the DELAY WEIGHT value for the local node
 in the volatile database.

8  –  IDENTIFICATION

 Removes from the volatile database the identification string for the
 local node.

9  –  INACTIVITY TIMER

 Resets to its default value the INACTIVITY TIMER value for the local
 node in the volatile database.

10  –  INCOMING

10.1  –  TIMER

 Resets to its default value the INCOMING TIMER value for the local
 node in the volatile database.

10.2  –  PROXY

 Resets to its default value the INCOMING PROXY value for the local
 node in the volatile database.

11  –  MAXIMUM

11.1  –  ADDRESS

 Resets to its default value the MAXIMUM ADDRESS value for the local
 node in the volatile database.

11.2  –  AREA

 Resets to its default value the MAXIMUM AREA value for the local
 node in the volatile database.

11.3  –  BROADCAST

11.3.1  –  NONROUTERS

 Resets to its default value the MAXIMUM BROADCAST NONROUTERS
 value in the volatile database.

11.3.2  –  ROUTERS

 Resets to its default value the MAXIMUM BROADCAST ROUTERS in
 the volatile database.

11.4  –  BUFFERS

 Resets to its default value the MAXIMUM BUFFERS value for the local
 node in the volatile database.

11.5  –  CIRCUITS

 Resets to its default value the MAXIMUM CIRCUIT value for the local
 node in the volatile database.

11.6  –  COST

 Resets to its default value the MAXIMUM COSTS value for the local
 node in the volatile database.

11.7  –  DECLARED OBJECTS

 Resets to its default value the MAXIMUM DECLARED OBJECTS value for
 the local node in the volatile database.

11.8  –  HOPS

 Resets to its default value the MAXIMUM HOPS value for the local
 node in the volatile database.

11.9  –  LINKS

 Resets to its default value the MAXIMUM LINKS value for the local
 node in the volatile database.

11.10  –  PATH SPLITS

 Resets to its default value, the MAXIMUM PATH SPLITS value for the
 local node in the volatile database.

11.11  –  VISITS

 Resets to its default value the MAXIMUM VISITS value for the local
 node in the volatile database.

12  –  NONPRIVILEGED item

 Removes from the volatile database the specified nonprivileged access
 control information.  Specify any or all of the following items for
 removal:

 	    ACCOUNT
 	    USER
 	    PASSWORD

13  –  OUTGOING

13.1  –  PROXY

 Resets to its default value the OUTGOING PROXY value for the local
 node in the volatile database.

13.2  –  TIMER

 Resets to its default value the OUTGOING TIMER value for the local
 node in the volatile database.

14  –  PATH SPLIT POLICY

 Resets to its default value the PATH SPLIT POLICY parameter for the
 local node in the volatile database.

15  –  PRIVILEGED item

 Removes from the volatile database the specified privileged access
 control information.  Specify any or all of the following items for
 removal:

 	    ACCOUNT
  	    USER
 	    PASSWORD

16  –  RETRANSMIT FACTOR

 Resets to its default value the RETRANSMIT FACTOR value for the local
 node in the volatile database.

17  –  ROUTING TIMER

 Resets to its default value the ROUTING TIMER value for the local node
 in the volatile database.

18  –  SEGMENT BUFFER SIZE

 Resets to its default value the SEGMENT BUFFER SIZE value for the local
 node in the volatile database.

19  –  STATE

 Applies only to purging the executor.  Removes from the permanent
 database the local node's state.

20  –  SUBADDRESSES

 Removes from the volatile database the value of the range of local DTE
 subaddresses.

21  –  Examples

      NCP>CLEAR EXECUTOR NAME IDENTIFICATION

          This command removes the local node's name and identification
          string from the volatile database.

      NCP>CLEAR EXECUTOR DELAY FACTOR

          This command removes delay factor from the volatile database
          which causes the software to use the default value.

22  –  NODE

 The CLEAR EXECUTOR NODE command clears the default executor designation
 for all NCP commands.  The executor of commands becomes the local node.
 The TELL prefix cannot be used with this command.

 After you issue the CLEAR EXECUTOR NODE command, NML, linked with NCP on
 the local node, will perform all NML operations.  NML uses the privileges
 of your current process instead of the default nonprivileged accounts.

 CLEAR EXECUTOR NODE

22.1  –  Examples

         NCP>SET EXECUTOR NODE TRNTO
         ...

         NCP>CLEAR EXECUTOR NODE