o  area addresses

    Support: All

    A set of area addresses. If the node is an end node, these are
    the area address portions of the NETs of all adjacent routers.
    If the node is a level 1 or level 2 router, this set is the union
    of the sets of manual area addresses reported in all level 1 LSPs
    received by this router.

 o  egp port

    Support: IP

    Name of the routing port entity used for sending and receiving
    EGP messages. This attribute is set when a routing egp group
    entity is enabled.

 o  icmp port

    Support: IP

    Name of the routing port entity used for sending and receiving
    ICMP messages. This attribute is set when the routing module is
    enabled and the protocols characteristic includes the value IP.

 o  L1 state

    Support: L1,L2

    State of the level 1 database.

    off       Routing is disabled.

    on        Routing is enabled and operating correctly.

    waiting   Routing has received routing information that it cannot
              store and is waiting for the overload to be removed.

 o  L2 state

    Support: L2

    State of the level 2 database.

    off       Routing is disabled.

    on        Routing is enabled and operating correctly.

    waiting   Routing has received routing information that it cannot
              store and is waiting for the overload to be removed.

 o  nearest L2 router adjacencies

    Support: L1,L2

    Names of adjacencies to be used for forwarding to the nearest
    level 2 router. If the node is a level 2 router adjacent to other
    areas, or if it is a level 1 router in an area with no attached
    level 2 routers, this set is empty.

 o  rip port

    Support: IP

    Name of the udp port entity used by the routing module for
    sending and receiving RIP messages. This attribute is set
    when a routing circuit entity is enabled with its rip state
    characteristic set to any value other than off.

 o  state

    Support:
    All

    State of the routing entity.

    off        The entity is disabled.
    on         The entity is enabled.

 o  uid

    Entity's unique identifier, which is generated when the entity is
    created.