o address filters All individual MAC addresses currently enabled by any of the ports on the station. o communication port DECnet-Plus device name for the station. o hardware address Individual medium access control (MAC) address that was assigned during manufacture of the communications hardware that is associated with the station. o mac address Current MAC address (if any) of the station. For more information about the MAC address, see the enable command. o receive mode Current receive mode for the station. Some stations may not support all modes. normal The station receives only those frames (individual and multicast) that meet the normal format, protocol, and access control requirements. all The station receives all individual-addressed multicast frames that meet the normal format, protocol, and address requirements, and all multicast-addressed frames regardless of their format, protocol, and address types. This function is only supported on OpenVMS. promiscuous The station receives all frames (individual and multicast) regardless of format, Ethernet protocol type, SNAP identifier, LLC SAP address, or MAC address. This function is only supported on OpenVMS. o state Operational state of the station. failed Either an attempt to enable the station failed during the self-test or the station was on and the data link determined that the station would now fail the self-test. initializing The station is currently being initialized and tested by the data link. off The station is disabled. on The station is enabled and available for use. For more information on station states, see the Network Management manual. o uid Entity's unique identifier, which is generated when the station is created.