/sys$common/syshlp/NCLHELP.HLB  —  SNA Peer Server Module, SNA LU Services, LU Subentity, show  Status
   UID               Displays the unique identifier for the LU entity.

   State             Displays the operational state of this LU entity.

      Off            You have issued a disable command for this
                     LU.  The LU is in the inactive or pending
                     inactive state.

      On             You have issued an enable command for
                     this LU.  The LU is operational and is either
                     supporting sessions, is ready to support
                     sessions, or is in the pending active state.

   Protocol          Displays the protocol state of this LU.
   State

      Active         This LU is enabled and is ready to be used in
                     sessions.

      Inactive       This LU is not enabled. You must issue an
                     enable command before SNA LU Services can
                     activate the LU.

      In Use         This LU is active and is in session, has a
                     link to a non-SNA application, or both.

   Active Ports      Displays the number of SNA ACCESS
                     Server Port entity instances that are using
                     this LU, which may or may not be involved in
                     an active LU-LU session.

   Active            Displays the number of active LU-LU sessions
   sessions          on this LU.  You can limit this number by
                     setting the Maximum Active Sessions
                     characteristic of the LU entity.

   Peak Active       Displays the highest number of LU-LU sessions
   Sessions          active at any one time on this LU.

   Queued            Displays the number of outstanding queued
   Sessions          session requests for this LU.

   Peak Queued       Displays the highest number of LU-LU sessions
   Sessions          queued at any one time on this LU.

   Activation        Displays the time at which the LU was last
   Time              activated by the SSCP.

   Dependent LU      Displays an indication of whether the
   Protocol State    dependent LU has been activated by the SSCP.
Close Help