Shows a XOT SAP entity which specifies the point at which
the XOT entity gains access to the TCP/IP environment for
the purposes of listening for inbound XOT connections.
show [node node-id] xot -
sap sap-name attribute [,attribute...]
all [attributes]
all characteristics
all counters
all identifiers
all status
The sap-name can be either a simple name that uniquely
identifies a particular SAP instance, or a wildcard
to identify multiple SAP instances.
Examples:
show xot sap * all
show xot sap sap-0 local ip address, state
LINK is a subentity of XOT SAP.
1 – link
Shows a XOT SAP LINK entity which represents a remote
system with which XOT is allowed to communicate.
show [node node-id] xot -
sap sap-name link link-name attribute [,attribute...]
all [attributes]
all characteristics
all counters
all identifiers
all status
The sap-name must be a simple name which uniquely
identifies a particular SAP instance. The link-name
can be either a simple name that uniquely identifies
a particular LINK instance, or a wildcard to identify
multiple LINK instances.
Examples:
show xot sap sap-0 link * remote IP address, state
show xot sap sap-0 link link-0 all
1.1 – Characteristics
o remote IP address
Default: 0.0.0.0 Value: IP Address
Specifies the remote IP address of the cooperating
XOT system that implements RFC1613. The IP address
is specified as a numeric address in the
form a.b.c.d.
o remote rfc1613 port number
Default: 1998 Value: TCP port number
Specifies the TCP port number to use for an outgoing
connection. The remote system must be listening for
inbound XOT connections on this port.
1.2 – Counters
o creation time
The time that the XOT SAP LINK entity was created.
o connects sent
The number of connection requests sent.
o connects received
The number of connection requests received.
o disconnects sent
The number of disconnect requests sent.
o disconnects received
The number of disconnects received.
o octets sent
The number of data octets sent from TCP/IP for
all ports on the link.
o octets received
The number of data octets received from TCP/IP
for all ports on the link.
o pdus sent
The number of X.25 packets sent from TCP/IP
for all ports on the link.
o pdus received
The number of X.25 packets received from TCP/IP
for all ports on the link.
o connects failed
The number of times an attempt to establish an
outgoing connection failed.
o link state changed
The number of times that the link has changed
state from enabled to disabled or disabled to
enabled.
o protocol errors
The number of protocol errors that occurred.
1.3 – Identifiers
o name
The simple name assigned to the LINK entity
when it was created.
1.4 – Status
o state
The state of the LINK entity:
On The LINK is enabled
Off The LINK is disabled
o uid
The universal identifier of the LINK entity,
which is generated when the entity is created.
2 – Characteristics
o local IP address
Default: 0.0.0.0 Value: IP Address
The IP interface (identified by the address) where the
SAP entity will listen. Any available interface is
specified with the address of 0.0.0.0. This characteristic
is mainly set when a system has multiple TCP/IP interfaces.
By default, XOT's single SAP entity is configured to listen
on all available IP interfaces (as specified by the local IP
address 0.0.0.0). You can create multiple SAP entities, each
listening on a unique IP address. However, if you create
more than one SAP entity, you must assign each entity a
unique IP address; no SAP entity can use the 0.0.0.0 address.
o local RFC1613 port number
Default: 1998 Value: TCP port number
The port number on which the SAP entity will listen for
inbound XOT connections. HP strongly recommends that you
use the value 1998 as specified in RFC1613.
3 – Counters
o creation time
The time that the XOT SAP entity was created.
o connections rejected
The number of times an inbound connection was rejected.
o sap state changed
The number of times that the SAP entity state changed.
4 – Identifiers
o name
The simple name assigned to the SAP entity when it was created.
5 – Status
o state
The state of the SAP entity:
On The entity is enabled.
Off The entity is disabled.
Connecting To PWIP The entity is connecting to TCP/IP.
o uid
The universal identifier of the SAP entity, which is generated
when the entity is created.