1  –  application

    Modifies the Filters attribute of the specified X25 Access
    Application instance to remove the specified filter name or
    names.

    remove [node node-id] x25 access -
       application application-name -
          filters {name[,name...]}

    Filters

    Default: None             Value: Set of names

    Set of filters that are associated with filtering calls for
    either X.25 or X.29 applications represented by this entity.

    Example:

    remove x25 access application X29_LOGIN filters {X29}

2  –  dte_class

    Modifies the Local DTEs attribute of the specified X25 Access
    DTE Class instance to remove the specified DTE name or names:

    remove [node node-id] x25 access -
      dte class class-name -
        local dtes {dte-name[,dte-name...]}

    Local DTEs

    Default: No names      Value: Set of DTE names

    Names of the local x25 protocol dte entities that belong to this
    DTE class. Note that these DTE entities need not exist when their
    names are entered in this set; DTEs that do not exist when the
    DTE class is used are not considered when the DTE class is used
    for an outgoing call.

    If an x25 protocol dte entity has status attribute state set to
    running when its name is added to local dtes, you must disable
    the DTE entity and reenable it (see the disable x25 protocol dte
    and enable x25 protocol dte commands) in order for the DTE to be
    considered when this DTE class is used for an outgoing call.

    You can specify this characteristic only for DTE classes with
    characteristic type local.

    Example:

    remove x25 access dte class dte-0 local dtes {dte-0,dte-1}

3  –  security_dte_class

    Modifies the Rights Identifiers attribute of the specified
    Remote DTE instance for a given X25 Access Security DTE Class
    to remove the specified identifier name or names.

    remove [node node-id] x25 access -
       security dte class class-name
         remote dte dte-name -
            rights identifiers {name[,name...]}

    Rights Identifiers

    Default: No rights identifiers     Value: Set of names

    Rights identifiers possessed by this remote DTE. Wildcards can
    be used in the identifiers that form part of each Access Control
    Entry (ACE) in an Access Control List (ACL). It is used for
    incoming call checking against the ACL attribute of a security
    filter entity that is used to guard a filter.

    Example:

    remove x25 access security dte class default -
         remote dte MATCHALL -
         rights identifiers {PSI$OPEN_SECURITY}

4  –  template

    Modifies the RPOA Sequence attribute of a given X25 Access
    Template instance to remove the specified DTE address or
    addresses.

    remove  [node node-id] x25 access -
       template template-name
          rpoa sequence {dte-address[,dte-address...]}

    RPOA Sequence

    Default: No DTE addresses       Value: Set of DTE addresses

    Private Operating Agency sequence of transit networks to be
    used in setting up the call. Format the values to specify a
    set of DTE addresses. Each DTE address is four digits long.
    An empty set indicates that no sequence is included in the
    outgoing call.

    Example:

    remove x25 access template "OSI Transport" -
          rpoa sequence {%x9999,%x8888}