Select application for the add command that modifies the filters
    of an x25 access application.

    Select dte_class for the add command that modifies the local dtes
    of an x25 access dte class.

    Select security_dte_class for the add command that modifies the
    rights identifiers of an x25 access security dte class remote dte.

    Select template for the add command to modify the rpoa sequence
    of an x25 access template.

1  –  application

    Modifies the Filters attribute of the specified X25 Access
    Application instance to include at least the specified name or
    names.

    add  [node node-id] x25 access application application-name -
          filters {name[,name...]}

    Filters

    Default: None             Value: Set of names

    Set of filters that are associated with filtering calls for
    either X.25 or X.29 applications represented by this entity.

    Example:

    add x25 access application X29_LOGIN filters {X29}

2  –  dte_class

    Modifies the Local DTEs attribute of the specified X25 Access
    DTE Class instance to include at least the specified DTE name or
    names:

    add [node node-id] x25 access dte class class-name -
        local dtes {dte-name[,dte-name...]}

    Local DTEs

    Default: No names      Value: Set of DTE names

    Names of the local x25 protocol dte entities that belong to this
    DTE class. Note that these DTE entities need not exist when their
    names are entered in this set; DTEs that do not exist when the
    DTE class is used are not considered when the DTE class is used
    for an outgoing call.

    If an x25 protocol dte entity has status attribute state set to
    running when its name is added to local dtes, you must disable
    the DTE entity and reenable it (see the disable x25 protocol dte
    and enable x25 protocol dte commands) in order for the DTE to be
    considered when this DTE class is used for an outgoing call.

    You can specify this characteristic only for DTE classes with
    characteristic type local.

    Example:

    add x25 access dte class dte-0 local dtes {dte-0,dte-1}

3  –  security_dte_class

    Modifies the Rights Identifiers attribute of the specified
    Remote DTE instance for a given X25 Access Security DTE Class
    to include at least the specified identifier name or names.

    add  [node node-id] x25 access security dte class class-name -
         remote dte dte-name  rights identifiers {name[,name...]}

    Rights Identifiers

    Default: No rights identifiers     Value: Set of names

    Rights identifiers possessed by this remote DTE. Wildcards can be
    used in the identifiers that form part of each Access Control
    Entry (ACE) in an Access Control List (ACL). It is used for
    incoming call checking against the ACL attribute of a security
    filter entity that is used to guard a filter.

    Example:

    add x25 access security dte class default -
         remote dte MATCHALL -
         rights identifiers {PSI$OPEN_SECURITY}

4  –  template

    Modifies the RPOA Sequence attribute of a given X25 Access
    Template instance to include at least the specified DTE
    address or addresses.

    add  [node node-id] x25 access template template-name -
          rpoa sequence {dte-address[,dte-address...]}

    RPOA Sequence

    Default: No DTE addresses       Value: Set of DTE addresses

    Private Operating Agency sequence of transit networks to be used
    in setting up the call. Format the values to specify a set of
    DTE addresses. Each DTE address is four digits long. An empty set
    indicates that no sequence is included in the outgoing call.

    Example:

    add x25 access template "OSI Transport" -
          rpoa sequence {%x9999,%x8888}