Use this directive to enable the DSA for communication with directory
 applications and other DSAs. On completion of this directive, the DSA
 is set to state ON.  The DSA listens for DOP, DSP, DAP, and DISP bind
 requests, depending on your setting for Presentation Address.  In
 addition, if you have set LDAP Port to a non-zero value, the DSA
 listens for LDAP requests.  For more information on a DSA's state, refer to
 STATUS attributes.

 Syntax:

 	ENABLE DSA

1  –  Errors

 The ENABLE directive can return one of the following errors:

 REASON:         Wrong State
 DESCRIPTION:    The DSA entity is not in the correct state.

 If the DSA is in state CREATING, ENABLING or UPDATING, wait for
 the DSA to complete the relevant task. The response indicates the
 current state of the DSA.

 REASON:         No AE Title
 DESCRIPTION:    The DSA's AE Title attribute has not been set.

 Use the SET DSA AE TITLE directive to set a valid AE Title.
 Refer to DSA Common_Datatypes for details of how to
 specify a valid AE Title attribute. Remember that the AE Title
 attribute should match the distinguished name of the directory
 entry that represents this DSA.

 REASON:         No Presentation Address
 DESCRIPTION:    The DSA's Presentation Address attribute has not
                 been set.

 Use the DSA configuration procedure to set a presentation address.
 See HP Enterprise Directory  - Management for
 details of how to use the DSA configuration procedure.