SHOW CONNECTIONS displays the World Wide Names of each
                 Host Bus Adapter (HBA) attached to the controller. If
                 connections between the HBAs and the MSA have been given
                 user-defined names, these names are also displayed.

                 Note:
                      - The SHOW CONNECTIONS command is applicable only for
                        MSA and not Smart Array controllers.

                      - Use the SHOW CONNECTIONS command to verify that all
                        connections to the MSA are recognized and defined.

                      - Use the SHOW CONNECTIONS command to display information
                        about each HBA connected to the MSA, including
                        connection name, WWPN, and profile.

                  Format:
                          SHOW CONNECTIONS / <Qualifiers>

1  –  Parameters

                     None

2  –  Qualifiers

2.1    /Verbose

                      Provides logging that can be interpreted by engineering.

3  –  Examples

                      MSA> SHOW CONNECTIONS

                      Command options
                      CONNECTION NAME-the name of a specific connection to
                      display.

                      Example MSA$UTIL response:
                      Connection Name: abc
                      Host WWNN = 50060b00-001d25b5
                      Host WWPN = 50060b00-001d25b4
                      Profile Name = Default
                      Unit Offset = 0
                      Controller 1 Port 1 Status = Online
                      Controller 2 Port 1 Status = Online