The Write Double-Height and Double-Width Line routine writes
    a line of text with double-height and double-width (highwide)
    characters.

    Format

      SMG$PUT_LINE_HIGHWIDE  display-id ,text [,line-advance]

                             [,rendition-set] [,rendition-complement]

                             [,flags] [,character-set]

1  –  Returns

    OpenVMS usage:cond_value
    type:         longword (unsigned)
    access:       write only
    mechanism:    by value

2  –  Arguments

 display-id

    OpenVMS usage:identifier
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Display identifier. The display-id argument is the address of
    an unsigned longword that contains the display identifier of the
    virtual display.

 text

    OpenVMS usage:char_string
    type:         character string
    access:       read only
    mechanism:    by descriptor

    Text to be output. The text argument is the address of the
    descriptor pointing to the output string.

 line-advance

    OpenVMS usage:longword_signed
    type:         longword (signed)
    access:       read only
    mechanism:    by reference

    Number of lines to advance. The line-advance argument is the
    address of a signed longword that contains the number of lines to
    advance after the output. This argument is optional.

 rendition-set

    OpenVMS usage:mask_longword
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Attribute specifier. The optional rendition-set argument is
    the address of a longword bit mask in which each attribute set
    causes the corresponding attribute to be set in the display. The
    following attributes can be specified using the rendition-set
    argument:

    SMG$M_BLINK     Displays blinking characters.
    SMG$M_BOLD      Displays characters in higher-than-normal
                    intensity.
    SMG$M_REVERSE   Displays characters in reverse video; that is,
                    using the opposite of the default rendition of
                    the virtual display.
    SMG$M_          Displays underlined characters.
    UNDERLINE
    SMG$M_          Specifies invisible characters; that is, the
    INVISIBLE       characters exist in the virtual display but do
                    not appear on the pasteboard.
    SMG$M_USER1     Displays user-defined attributes.
    through
    SMG$M_USER8

    The display-id argument must be specified when you use the
    rendition-set argument.

 rendition-complement

    OpenVMS usage:mask_longword
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Attribute complement specifier. The optional rendition-
    complement argument is the address of a longword bit mask in
    which each attribute set causes the corresponding attribute to be
    complemented in the display. All attributes that can be specified
    with the rendition-set argument can be complemented with the
    rendition-complement argument. The display-id argument must be
    specified when you use the rendition-complement argument.

    The optional arguments rendition-set and rendition-complement
    let the user control the attributes of the virtual display. The
    rendition-set argument sets certain virtual display attributes,
    while rendition-complement complements these attributes. If the
    same bit is specified in both the rendition-set and rendition-
    complement parameters, rendition-set is evaluated first, followed
    by rendition-complement. By using these two parameters together,
    the user can control each virtual display attribute in a single
    procedure call. On a single-attribute basis, the user can cause
    the following transformations:

    Set  Complement Action

    0    0          Attribute set to default
    1    0          Attribute on
    0    1          Attribute set to complement of default setting
    1    1          Attribute off

 flags

    OpenVMS usage:mask_longword
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Optional bit mask that specifies the action to be taken if
    the text does not fit on the line. The flags argument is the
    address of an unsigned longword that contains the flag. The flags
    argument accepts the following values:

    0                  Does not wrap (default).
    SMG$M_WRAP_CHAR    Wraps at the last character on the line.
    SMG$M_WRAP_WORD    Wraps at the last space on the line.

 character-set

    OpenVMS usage:longword_unsigned
    type:         longword (unsigned)
    access:       read only
    mechanism:    by reference

    Specifies the default character set for all text in this virtual
    display. The character-set argument is the address of an unsigned
    longword that contains the character set code. Valid values are
    SMG$C_ASCII (default), and SMG$C_SPEC_GRAPHICS.