/sys$common/syshlp/HELPLIB.HLB  —  PMDF  POPSTORE  COPY  Command Qualifiers

1    /CONFIRM 

       /CONFIRM
       /NOCONFIRM (default)

    Prompt for positive confirmation before carrying out the
    indicated operation. /NOCONFIRM is the default behavior.

2    /FLAGS 

       /FLAGS=(flag[,...])

    Specify one or more usage flags to associate with the new
    account. The recognized flags are as follows:

    DISMAIL        User is not allowed to receive new mail messages.
    DISUSER        User is not allowed to access their account.
    LOCKPWD        User is not allowed to change their password.
    MANAGE         User is allowed to manage popstore accounts.
    MIGRATED       Internal flag used by the PMDF migration
                   utilities.
    PWD_           Password information is stored outside of the
    ELSEWHERE      popstore.
    NODISMAIL      User is allowed to receive new mail messages.
    NODISUSER      User is allowed to access their account.
    NOLOCKPWD      User is allowed to change their password.
    NOMANAGE       User is not allowed to manage popstore accounts.
    NOMIGRATED     Internal flag used by the PMDF migration
                   utilities.
    NOPWD_         Password information is stored within the
    ELSEWHERE      popstore.

3    /GROUP_NAME 

       /GROUP_NAME=name

    Place the new account into the specified management group. If not
    specified, the the management group of the account being copied
    is assumed. A manager can not create an account into a group
    which they cannot manage.

4    /LOG 

       /LOG
       /NOLOG (default)

    When the operation is successful, output a status message stating
    that the operation succeeded. Note that error messages are always
    indicated. /NOLOG is the default behavior.

5    /OVERDRAFT 

       /OVERDRAFT=value
       /NOOVERDRAFT

    The /OVERDRAFT qualifier specifies the amount of message storage
    by which the new account can exceed its message storage quota. If
    the account is currently using less than its storage quota, then
    a new message can be stored provided that it will not result in
    the account's storage exceeding the sum of the its storage and
    overdraft quotas.

    By default, this quantity is specified in units of kbytes;
    however, the SET STORAGE_UNITS command can be used to change
    the units used.

    The /NOOVERDRAFT qualifier is equivalent to /OVERDRAFT=0 and
    specifies that the new account has no overdraft quota.

    The maximum value is 4 gigabytes minus 1. If the value specified
    exceeds the maximum, the value is set to zero (no overdraft
    quota).

6    /OWNER 

       /OWNER=owner

    A text string specifying the name of the owner of the new
    account. The length of the string can not exceed 40 bytes. The
    owner field is not used by the popstore itself; it is generally
    used by humans to associate account usernames with the actual
    owner of the account.

7    /PASSWORD 

       /PASSWORD=password
       /NOPASSWORD

    Specifies the new account's access password. The length of the
    password can not exceed 32 bytes. Access by non-managers to the
    account requires knowledge of this password. For instance, to
    access the account from a POP3 client, the correct username and
    password associated with the account must be supplied.

    The /NOPASSWORD qualifier specifies that the new account does not
    require a password to access it.

    Note that passwords are case sensitive. Note further that the
    command line reader will convert to lower case any string not
    enclosed in quotes. As such, a password containing upper case
    characters must be enclosed in quotes.

8    /PRIVATE 

       /PRIVATE=data

    Site-specific account data for the new account can be stored in
    the account profile file using this qualifier. The data string
    can not exceed a length of 64 bytes. This data is not used by
    the popstore itself but can be used by site-developed procedures
    which access account profiles.

9    /PROMPT 

       /PROMPT (default)
       /NOPROMPT

    By default if a wildcard is used, even if /NOCONFIRM is
    specified, one confirmation prompt is issued. If /NOPROMPT is
    specified, there is no prompting at all.

10    /PWDEXPIRED 

       /PWDEXPIRED
       /NOPWDEXPIRED (default)

    If /PWDEXPIRED is specified, then the account is marked as
    pre-expired. This means that if password expiration is enabled
    through the PASSWORD_LIFETIME option, then the user must change
    their password immediately.

    If /NOPWDEXPIRED is specified (the default), then the account is
    marked as not pre-expired. The time of last password change is
    set to the current time. If password expiration is enabled, then
    the user does not have to change the password until the PASSWORD_
    LIFETIME has run out.

11    /QUOTA 

       /QUOTA=value
       /NOQUOTA

    The /QUOTA qualifier specifies the new account's message storage
    quota. The account can continue to receive new messages so long
    as the storage consumed by its currently stored messages does not
    exceed its message storage quota. See also /OVERDRAFT.

    A quota value of zero, as specified with either /QUOTA=0 or
    /NOQUOTA, conveys unlimited storage. That is, to grant an account
    unlimited storage set its quota to zero.

    By default, this quantity is specified in units of kbytes;
    however, the SET STORAGE_UNITS command can be used to change
    the units used.

    The maximum value is 4 gigabytes minus 1. If the value specified
    exceeds the maximum, the value is set to zero (unlimited quota).
Close Help