Invokes a disconnection test.

1  –  GENERAL QUALIFIERS

1.1    /NODENAME

       /NODENAME=node-id

    Identifies the node (by name or address) on which DTR is to run. The
    default is the local node. DTR runs on the default nonprivileged
    account on the remote node because access control information cannot
    be used as part of the node name. To run DTR on an account other
    than the default, you must create a new account and associate it
    with the DTR object.

1.2    /PRINT

       /PRINT
       /NOPRINT (D)

    Instructs DTS to print (or log) test results. The default is /NOPRINT.

2  –  COMMAND-SPECIFIC QUALIFIERS

2.1    /TYPE

       /TYPE=test-type

    Indicates the subtest for the disconnection test.  There are two subtests:

    SYNCHRONOUS   Indicates a synchronous disconnect test.
    ABORT         Indicates a disconnect abort test. The default test type.

2.2    /RETURN

       /RETURN=return-option
       /NORETURN (D)

    Indicates the type of optional user data DTR returns. There are two
    possibilities:

    STANDARD   Indicates standard user data.
    RECEIVED   Indicates received user data.

    The default is /NORETURN that disables return of user data.

3  –  Example

    _Test:   DISCONNECT/NODENAME=DENVER/TYPE=ABORT

    This command invokes the disconnection test with the disconnect abort
    subset. DTS performs this test with DTR on remote node DENVER. No
    optional user data is to be returned.