This directory, known by the logical name SYS$STARTUP, is
used when starting up the operating system. The logical name
SYS$STARTUP is a searchlist that points to the [SYS$STARTUP]
and [SYSMGR] directories.
1 – ACME$STARTUP.COM
A Coordinated Startup command procedure used to start the
VMS ACME
2 – AMDS$STARTUP.COM
Startup routine for the DECamds application
3 – CLUE$STARTUP.COM
Command procedure to run the Crash Log utility (CLUE) at system startup
4 – DDTM$XA_SHUTDOWN.COM
DECdtm XA Shutdown command proceedure
5 – DDTM$XA_STARTUP.COM
DECdtm XA Startup command proceedure
6 – DDTM$XG_START_SERVER.COM
DECdtm XA Gateway Startup proceedure
7 – DECDTM$SHUTDOWN.COM
Command procedure for shutting down DECdtm. However, if any
transactions are active when the command procedure is executed,
the DECdtm TP_SERVER is not stopped, and transactions continue.
8 – DECDTM$STARTUP.COM
DECdtm services startup command procedure
9 – DECW$STARTXTERMINAL.COM
DECwindows command procedure for Xterminals
10 – ENCRYPT_START.COM
This file is included in the latest system build, but a description of the file is not available.
11 – ESS$LAD_STARTUP.COM
LAD startup command procedure
12 – ESS$LAD_STARTUP.DAT
LAD startup data file
13 – ESS$LAD_STARTUP.TEMPLATE
This file is included in the latest system build, but a description of the file is not available.
14 – ESS$LAST_STARTUP.COM
LAST startup command procedure
15 – ESS$LAST_STARTUP.DAT
LAST driver startup data file
16 – ESS$LAST_STARTUP.TEMPLATE
Template file used to create ESS$LAST_STARTUP.DAT
17 – ESS$STARTUP.COM
Startup file to invoke LAST_STARTUP.COM and LAD_STARTUP.COM
18 – GCMSRV$STARTUP.COM
GCM Server startup command procedure
19 – ICC$STARTUP.COM
ICC system startup file
20 – ICC$SYSTARTUP.COM
ICC startup command procedure
21 – ICC$SYSTARTUP.TEMPLATE
Template file used to create ICC$SYSTARTUP.COM
22 – IPC$STARTUP.COM
IPC startup command procedure
23 – ISCSI$INITIATOR_SHUTDOWN.COM
This file is included in the latest system build, but a description of the file is not available.
24 – ISCSI$INITIATOR_STARTUP.COM
This file is included in the latest system build, but a description of the file is not available.
25 – KRB$CONFIGURE.COM
Command procedure to configure Kerberos servers and clients
26 – KRB$SHUTDOWN.COM
Command procedure to shutdown Kerberos servers
27 – KRB$STARTUP.COM
Command procedure to startup Kerberos servers
28 – LAN$STARTUP.COM
Startup command procedure for the LANACP Server process
29 – LAT$CONFIG.COM
LAT site-independent startup command procedure; loads the drive
and starts LATACP
30 – LAT$STARTUP.COM
LAT site-independent startup command procedure; calls
LAT$CONFIG.COM and LAT$SYSTARTUP.COM
31 – LD$STARTUP.COM
Startup command procedure included with LDDRIVER
32 – LDAPACME$CONFIG-STD.INI_TEMPLATE
This file is included in the latest system build, but a description of the file is not available.
33 – LDAPACME$STARTUP-STD.COM
This file is included in the latest system build, but a description of the file is not available.
34 – LDAP_LOCALUSER_DATABASE.TXT_TEMPLATE
This file is included in the latest system build, but a description of the file is not available.
35 – LICENSE_CHECK.EXE
Checks for OpenVMS Product Authorization Key (PAK); in a cluster,
also checks for OpenVMS Clusters PAK
36 – LM$STARTUP.COM
This file is included in the latest system build, but a description of the file is not available.
37 – NTA$STARTUP.COM
Startup command procedure for the NT Affinity facility
38 – NTA$STARTUP_AUTHENTICATED_RPC.COM
Command procedure that provides controlled startup of related
services for COM support
39 – NTA$STARTUP_NT_ACME.COM
A Coordinated Startup command procedure used to start the
NT ACME
40 – REG$STARTUP.COM
Command procedure used to start the OpenVMS Registry
41 – SYS$NET_SERVICES.COM
Registers all network services that have startup procedures
in SYS$STARTUP
42 – SYS$NET_SERVICES_DECNET.COM
Uses SET NET to REGISTER (or UPDATE) the network attributes
for DECnet Phase IV or DECnet-Plus (DECnet_OSI)
43 – SYS$POWER_MONITOR_STARTUP.COM
System startup file that monitors the status of H7263 power
regulators on AlphaServer 8400 systems
44 – SYS$SMHANDLER_STARTUP.COM
Obsolete file; prior to Version 7.3-2, this procedure started
the system management event handler process.
45 – TNT$SHUTDOWN.COM
OpenVMS Management Station shutdown command file
46 – TNT$STARTUP.COM
OpenVMS Management Station startup command file
47 – USB$RUN_UCM_SERVER.COM
This file is included in the latest system build, but a description of the file is not available.
48 – VMS$BASEENVIRON-050_INDICT_SERVER.COM
Startup command file for the Component indictment process
49 – VMS$BASEENVIRON-050_LIB.COM
Part of the Base Environment phase of the OpenVMS startup
command procedures
50 – VMS$BASEENVIRON-050_SMISERVER.COM
Part of the Base Environment phase of the OpenVMS startup
command procedures
51 – VMS$BASEENVIRON-050_VMS.COM
Part of the Base Environment phase of the OpenVMS startup
command procedures
52 – VMS$CONFIG-050_ACME_SERVER.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
53 – VMS$CONFIG-050_AUDIT_SERVER.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
54 – VMS$CONFIG-050_CACHE_SERVER.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
55 – VMS$CONFIG-050_CSP.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
56 – VMS$CONFIG-050_ERRFMT.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
57 – VMS$CONFIG-050_JOBCTL.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
58 – VMS$CONFIG-050_LMF.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
59 – VMS$CONFIG-050_OPCOM.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
60 – VMS$CONFIG-050_SECURITY_SERVER.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
61 – VMS$CONFIG-050_SHADOW_SERVER.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
62 – VMS$CONFIG-050_VMS.COM
Part of the Configuration phase of the OpenVMS startup command
procedures
63 – VMS$DECW_AUTOGEN.COM
DECwindows AUTOGEN command procedure. which sets the necessary
system parameters for DECwindows Motif
64 – VMS$DECW_CHECK_PARAMS.COM
An OpenVMS version of DECW$CHECK_PARAMS.COM
65 – VMS$DEVICE_STARTUP.COM
System startup command procedure
66 – VMS$END-050_COORDINATED.COM
The driver command procedure which drives the invocation of
base operating system Coordinated Startup command procedures
67 – VMS$INITIAL-050_CONFIGURE.COM
Part of the Initialization phase of the OpenVMS startup
command procedures
68 – VMS$INITIAL-050_LIB.COM
Part of the Initialization phase of the OpenVMS startup
command procedures
69 – VMS$INITIAL-050_VMS.COM
Part of the Initialization phase of the OpenVMS startup
command procedures
70 – VMS$LAYERED.DAT
System startup data file used by the system startup procedure
to execute site-specific and layered product startup files that
are added by the system manager using the SYSMAN utility.
71 – VMS$LAYERED.TEMPLATE
Template file used by the OpenVMS installation procedure to
create the site-specific and layered product startup database
file VMS$LAYERED.DAT
72 – VMS$LPBEGIN-050_SMHANDLER.COM
Startup procedure for the system management event handler process,
which runs the image [SYSEXE]SYS$SMHANDLER.EXE
73 – VMS$LPBEGIN-050_STARTUP.COM
System startup command procedure
74 – VMS$PHASES.DAT
System startup data file
75 – VMS$VMS.DAT
System startup data file
76 – VPM$STARTUP.COM
Starts the Monitor utility server