Displays information about network services registered on a node.
Format
SHOW NETWORK [network-service]
1 – Parameter
network-service
Specifies a network service for which you want to display
information.
If you do not specify a service, the SHOW NETWORK command
displays information about all services that are currently
registered on the local node.
2 – Description
The SHOW NETWORK command displays information about network
services available on an OpenVMS system.
3 – Qualifiers
3.1 /FULL
Displays all the information for the specified network service.
3.2 /OLD
If you are running DECnet Phase IV, retains the behavior of
the SHOW NETWORK command prior to OpenVMS Version 7.0. If the
local node is a routing node, the /OLD qualifier provides routing
information.
3.3 /OUTPUT
/OUTPUT[=filespec]
/NOOUTPUT
Controls where the output of the command is sent. By default,
the output of the SHOW NETWORK command is sent to the current
SYS$OUTPUT device (usually your terminal).
The asterisk (*) and the percent sign (%) wildcard characters
are not allowed in the file specification.
If you enter the /NOOUTPUT qualifier, output is suppressed.
4 – Examples
1.$ SHOW NETWORK
Product: DECNET Node: VADIR Address(es): 24.365
Product: TCP/IP Node: vadir.lkr.dec.com Address(es): 161.114.99.17
This command was executed on a system running DECnet Phase V
and TCP/IP. It indicates that the DECNET and "TCP/IP" network-
service parameters are valid for this system.
2.$ SHOW NETWORK "TCP/IP"
Product: TCP/IP Node: vadir.lkr.dec.com Address(es): 161.114.99.17
When the TCP/IP network-service parameter is used, it must be
enclosed in enclosed in quotes because it contains a slash.
3.$ SHOW NETWORK/FULL DECNET
Product: DECNET Manufacturer: VMS Sofware, Inc.
Node: TARPON Address(es): 17.51
Network Type: DNA IV Interface(s): net 0
Node Volatile Characteristics as of 8-OCT-2009 09:15:12
Executor node = 17.51 (TARPON)
Identification = VSI DECnet for OpenVMS I64
Management version = V4.0.0
Incoming timer = 45
Outgoing timer = 60
Incoming Proxy = Enabled
Outgoing Proxy = Enabled
NSP version = V4.1.0
Maximum links = 32
Delay factor = 80
Delay weight = 5
Inactivity timer = 60
Retransmit factor = 10
Routing version = V2.0.0
Type = nonrouting IV
Routing timer = 600
Broadcast routing timer = 180
Maximum address = 1023
Maximum circuits = 16
Maximum cost = 1022
Maximum hops = 30
Maximum visits = 63
Maximum area = 63
Max broadcast nonrouters = 64
Max broadcast routers = 32
Maximum path splits = 1
Area maximum cost = 1022
Area maximum hops = 30
Maximum buffers = 100
Buffer size = 576
Default access = incoming and outgoing
Pipeline quota = 4032
Alias maximum links = 32
Path split policy = Normal
Maximum Declared Objects = 31
Known Link Volatile Summary as of 8-OCT-2009 09:15:12
No information in database
Node Counters as of 8-OCT-2009 09:15:12
Executor node = 17.51 (TARPON)
856 Seconds since last zeroed
471 Bytes received
468 Bytes sent
27 Messages received
28 Messages sent
1 Connects received
1 Connects sent
0 Response timeouts
0 Received connect resource errors
2 Maximum logical links active
0 Aged packet loss
0 Node unreachable packet loss
0 Node out-of-range packet loss
0 Oversized packet loss
0 Packet format error
0 Partial routing update loss
0 Verification reject
The DECNET network-service parameter is used to signify either
DECnet Phase IV or DECnet Phase V. Use the /FULL qualifier to
determine the DECnet phase on the node. This is an example from
a system running DECnet Phase IV.
4.$ SHOW NETWORK/FULL DECNET
Product: DECNET Manufacturer: VMS Software, Inc.
Node: VADIR Address(es): 24.365
Network Type: DNA V Interface(s): net 0
Node 0
at 2002-01-16-12:50:30.528-05:00Iinf
Identifiers
Name = DEC:.XPR.VADIR
Address =
{
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_OSInetwork , 49::00-18:AA-00-04-00-6D-61:21 ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_OSInetwork, 49::00-18:AA-00-04-00-12-60:21
(DEC:.XPR.BULEAA) ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV2 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_IP , 161.114.99.17 ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_NSP ] ,
[ DNA_OSInetwork , 49::00-18:AA-00-04-00-6D-61:20 ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_NSP ] ,
[ DNA_OSInetwork , 49::00-18:AA-00-04-00-12-60:20 (DEC:.XPR.BULEAA) ]
)
}
Status
UID = 562B4000-43CF-11CF-8001-AA0004007E10
State = On
Functions Enabled =
{
Address Watcher ,
CMIP Listener
}
ID = 00-00-F8-01-FD-62
Characteristics
Version = T5.0.3
Implementation =
{
[
Name = OpenVMS AXP ,
Version = "V7.2-1 "
] ,
[
Name = VSI DECnet-Plus for OpenVMS ,
Version = "V7.2-1 ECO03 31-MAY-2001 16:54:53.36"
]
}
Script Location = <Default value>
Maximum Listeners = 0
Listener Template = <Default value>
Secondary Names =
{
}
This example is from a system running DECnet Phase V.
5.$ SHOW NETWORK/OLD
OpenVMS Network status for local node 12.378 EMARET on 16-JAN-2002
14:46:35.64
This is a nonrouting node, and does not have any network information.
The designated router for EMARET is node 12.1023 A12LKR.
The /OLD qualifier can be used only on a system running DECnet
Phase IV.