AREA ADDRESSES
         Support: All

         A set of area addresses. If the node is an end node, these are the
         area address portions of the NETs of all adjacent routers. If the
         node is a  level 1 or level 2 router, this set is the union of the
         sets of manual area addresses reported in all level 1 LSPs received by
         this router.

     EGP PORT
         Support: IP

         Name of the routing port entity used for sending and receiving EGP
         messages.  This attribute is set when a routing egp group entity is
         enabled.

     ICMP PORT
         Support: IP

         Name of the routing port entity used for sending and receiving ICMP
         messages. This attribute is set when the routing module is enabled
         and the protocols characteristic includes the value IP.

     L1 STATE
         Support: L1,L2

         State of the level 1 database.

          OFF -     Routing is disabled.

          ON -      Routing is enabled and operating correctly.

          WAITING - Routing has received routing information that it cannot
                    store and is waiting for the overload to be removed.

     L2 STATE
         Support: L2

         State of the level 2 database.

         OFF -     Routing is disabled.

         ON -      Routing is enabled and operating correctly.

         WAITING - Routing has received routing information that it cannot
                   store and is waiting for the overload to be removed.

     NEAREST L2 ROUTER ADJACENCIES
         Support: L1,L2

         Names of adjacencies to be used for forwarding to the nearest level 2
         router.  If the node is a level 2 router adjacent to other areas, or
         if it is a level 1 router in an area with no attached level 2 routers,
         this set is empty.

     RIP PORT
         Support: IP

         Name of the udp port entity used by the routing module for sending
         and receiving RIP messages. This attribute is set when a routing
         circuit entity is enabled with its rip state characteristic set to
         any value other than off.

     STATE
         Support: All

         State of the routing entity.

         OFF - The entity is disabled.

         ON  - The entity is enabled.