NET$MGMT_HELP.HLB  —  actions  Disable

1  –  ALIAS

1.1  –  Port

    Pushing the CONTINUE button will cause the specified Alias Port to be
    placed in the disabled state.

    Pushing the CANCEL button will dismiss the window with no action taken.

2  –  CSMA-CD

2.1  –  Station

    Pushing the CONTINUE button will cause the specified CSMA-CD Station
    to be placed in the disabled state.

    Pushing the CANCEL button will dismiss the window with no action taken.

3  –  DDCMP

3.1  –  Link

    Pushing the CONTINUE button will cause the specified DDCMP Link to be
    placed in the disabled state.

    Pushing the CANCEL button will dismiss the window with no action taken.

3.1.1  –  logical_station

    Pushing the CONTINUE button will cause the specified DDCMP Link Logical
    Station to be placed in the disabled state.

    Pushing the CANCEL button will dismiss the window with no action taken.

4  –  evd

    Pushing the CONTINUE button will cause the Event Dispatcher to be set
    to the disabled state.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.1  –  outbound_stream

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Outbound Stream to be set to the disabled state.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.2  –  Relay

    Pushing the CONTINUE button will cause the Event Dispatcher Relay to be
    disabled.  All three Event Relay Logging entities (Console, File and
    Monitor) will be automatically deleted.  This will discontinue all
    logging of DECnet Phase IV events to the DECnet-Plus system.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.2.1  –  Logging

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Relay Logging entity, either Console, Monitor, or File, to be disabled.

    Disabling the Console logging will prevent Phase IV events from being
    logged to the operator console (OPA0).

    Disabling the Monitor logging will prevent Phase IV events from being
    logged to the Operator Communication Facility (OPCOM).

    Disabling the File logging will prevent Phase IV events from being
    recorded in binary format.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.3  –  Sink

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Sink entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

5  –  FDDI

5.1  –  Station

    Pushing the CONTINUE button will cause the specified FDDI Station
    entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

6  –  FRAME

    Pushing the CONTINUE button will cause the FRAME entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

6.1  –  Link

    Pushing the CONTINUE button will cause the specified FRAME Link entity
    to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

7  –  HDLC

7.1  –  Link

    Pushing the CONTINUE button will cause the specified HDLC Link entity
    to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

7.1.1  –  logical_station

    Pushing the CONTINUE button will cause the specified HDLC Link Logical
    Station entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

8  –  MOP

    Pushing the CONTINUE button will cause the MOP entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

9  –  Modem

9.1  –  line

    Pushing the CONTINUE button will cause the MODEM Connect Line entity to be
    disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

9.2  –  Circuit

    Pushing the CONTINUE button will cause the specified MOP Circuit
    entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

10  –  NSP

    Pushing the CONTINUE button will cause the NSP entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

11  –  osak

    Pushing the CONTINUE button will cause the specified OSAK entity to be
    disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

12  –  osi_transport

    Pushing the CONTINUE button will cause the OSI Transport entity to be
    disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13  –  Routing

    Pushing the CONTINUE button will cause the Routing entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1  –  Circuit

    Pushing the CONTINUE button will cause the selected Routing Circuit
    to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1.1  –  ip_reachable_address

    Pushing the CONTINUE button will cause the selected Routing Circuit IP
    Reachable Address to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1.2  –  reachable_address

    Pushing the CONTINUE button will cause the selected Routing Circuit
    Reachable Address to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.2  –  egp_group

    Pushing the CONTINUE button will cause the selected Routing EGP Group
    to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.2.1  –  group_egp_neighbor

    Pushing the CONTINUE button will cause the selected Routing EGP Group
    EGP Neighbor to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

14  –  x25_access

    Pushing the CONTINUE button will cause the X.25 Access entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.1  –  app

    Pushing the CONTINUE button will cause the selected X.25 Access Application
    entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

15  –  x25_client

    Pushing the CONTINUE button will cause the X.25 Client entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

16  –  x25_relay

16.1  –  client

    Pushing the CONTINUE button will cause the selected X.25 Relay Client entity
    to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

16.2  –  pvc

    Pushing the CONTINUE button will cause the selected X.25 Relay PVC entity
    to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

17  –  x25_server

    Pushing the CONTINUE button will cause the X.25 Server entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

17.1  –  client

    Pushing the CONTINUE button will cause the selected X.25 Server Client
    entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

18  –  x25_protocol

18.1  –  dte

    Pushing the CONTINUE button will cause the selected X.25 Protocol DTE entity
    to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

18.1.1  –  pvc

    Pushing the CONTINUE button will cause the selected X.25 Protocol DTE PVC
    entity to be disabled.

    Pushing the CANCEL button will dismiss the window with no action taken.
Close Help