show [node node-id] x25 relay attribute [,attribute...]
all [attributes]
all characteristics
1 – Characteristics
o maximum active connections
Maximum number of active connections supported by this module.
This characteristic is an optional argument on the create
command. You cannot modify this characteristic.
o version
Version number of the X.25 Relay architecture to which this
implementation conforms. You cannot modify this attribute.
2 – client
show [node node-id] x25 relay -
client client-name attribute [,attribute...]
all [attributes]
all characteristics
all counters
all identifiers
all status
2.1 – Characteristics
o DTE class
Default: No DTE class Value: Simple-name
Name of the x25 access DTE class entity to use when making the
outgoing call.
o filters
Default: No filters Value: Set of simple names
Set of filters that are listened to by this client. Each name
is the name of an x25 access filter entity. For the add and set
commands, the x25 relay client entity must be in the Off state
before the filters attribute can be modified.
o rights identifiers
Default: No rights identifiers Value: Set of simple names
Set of rights identifiers that this client possesses. It is used
when placing the outgoing call.
o template
Default: No template Value: Simple name
Name of the x25 access template entity to be used for the
outgoing call.
2.2 – Counters
o connections failed
Number of times that a connection setup has failed.
o connections lost
Number of times that a successfully established connection has
been abnormally terminated.
o connections made
Number of connections that have been made successfully.
o creation time
Time at which this entity was created.
2.3 – Identifier
o name
Simple name assigned to the client when it is created.
2.4 – Status
o active connections
Number of connections that are currently active on this client. A
connection is a pair of incoming/outgoing calls. This value does
not include connections that are still waiting to be established.
o state
Specifies the state of the x25 relay client entity.
off The entity is disabled.
on The entity is enabled.
o uid
Entity's unique identifier, which is generated when the entity is
created.
3 – pvc
show [node node-id] x25 relay -
pvc pvc-name attribute [,attribute...]
all [attributes]
all characteristics
all counters
all identifiers
all status
3.1 – Characteristics
o local PVC
Default: No PVC name Value: Simple name
Name of the PVC entity that represents the local end of the
connection.
o remote DTE class
Default: No DTE class Value: Simple name
DTE class to be used when setting up the remote end of the
connection. It is only specified if the relayed PVC does not
reside on the local system. This attribute is only applicable
to connector nodes, and will not be visible in other
implementations.
o remote PVC
Default: No PVC name Value: Simple-name
Name of the PVC entity that represents the relayed end of the
connection.
o retry limit
Default: 10 Value: 0-65535
Number of attempts that will be made to set up the PVC connection
following the failure of an enable command. This attribute is
only applicable to connector nodes, and will not be visible
in other implementations.
o retry timer
Default: 60 Value: 1-65535
Interval, in seconds, between retries. This attribute is only
applicable to connector nodes, and will not be visible in
other implementations.
o rights identifiers
Default: No rights identifiers Value: Set of simple names
Rights identifiers possessed by this entity. These rights are
used to access the local PVC and relayed PVC if it resides on the
local system.
3.2 – Counters
o connections made
Number of successful connections made by this entity.
o creation time
Time at which this entity was created.
o times connections lost
Number of times that a successfully established PVC connection
has been abnormally terminated.
o times retry limit exceeded
Number of times that the retry limit has been reached when trying
to set up a PVC connection.
3.3 – Identifier
o name
Simple name assigned to the PVC when it is created.
3.4 – Status
o state
State of the x25 relay pvc entity.
failed The retry mechanism has failed to set up the connection.
off The PVC is disabled.
on The PVC is enabled.
retrying The Retry timer is running.
o uid
Entity's unique identifier, which is generated when the entity is
created.